
Dorsett Educational Systems
Principles of Accounting

---

This software is not compatible with Disk Basic and will
hang if used with a disk controller.

Tested successfully with MESS and XRoar emulators.

---

USING DORSETT CASSETTES IN THE COLOR COMPUTER

    The Dorsett M400C lesson program requires a short monitor 
program to initialize the computer. Cassettes with monitor
programs  have 'CLOADM' and 'EXEC' printed on the cassette label.
M400C monitor programs are recorded at the begining of lesson 
programs 1 and 9 of M400C programs.

To load a monitor program:

    Insert cassette with monitor program into recorder.
    Rewind if necessary. Set volume at 7. Press Play.
    Type CLOADM and enter. Cassette should start.
    When the OK appears, type EXEC and enter.
    Press any key to begin viewing the lesson.
 
    After the M400C monitor program is loaded, any other M400C
cassette may be played. Always reload the monitor program when
playing those M400C tapes which have CLOADM and EXEC printed
on the cassette label. Pressing the Break key will return to the title
page, which is the proper point to begin viewing any of the other
M400C style programs. If the computer power is turned off, reload the
M400C monitor program before viewing the next lesson tape.

    The cassette volume setting must be high enough to load the
monitor program. Afterwards, you may wish to turn it down slightly
if audio distortion occurs.

    Please note that the Dorsett M400C programs will not load and 
operate properly if other equipment is plugged in.

    Also, as a word of caution, it is recommended that the cassette
player be located aminimum of 18" from the TV monitor, otherwise,
the magnetic field associated with the sweeping circuits in the TV
monitor may cause some electrical interference causing the programs
to malfunction.

    DORSETT EDUCATIONAL SYSTEMS, INC.
    BOX 1226, NORMAN, OKLAHOMA 73070
